Last updated on August 3rd, 2022 at 09:24 am
How to Install Hydration Bladder in Backpack:
2 Simple Ways to Do it Correctly
A hydration bladder is an essential part of your backpack. It is always better to carry water in a container when you go on an outdoor trip because it will help you stay hydrated and fresh the whole time.
Hydration bladders are an ideal way to get clean drinking water into your pack without adding unnecessary weight. Many outdoor enthusiasts use hydration bladders to store water in their rucksacks for day hikes, or overnight camping trips. They can easily be accessed along the trail and provide plenty of water for a quick drink, or to help you rehydrate after a long hike.
If you are planning on going hiking or camping, there is a great chance that you will be taking along a hydration bladder. The main benefit of having a bladder installed is that you never have to worry about running out of water while hiking or backpacking.
Adding hydration bladder to a regular backpack is not as difficult as it seems. You only need to follow few simple steps to accomplish the task. In this article, we will show you How to Install Hydration Bladder in Backpack.
Table of Contents
How to Install Hydration Bladder in Backpack
Hydration bladders are one of the best ways to keep water handy while you are trekking and can be installed by making some changes to the bag. Installing the bladder is not a difficult task; however, there are certain things you need to keep in mind while doing so.
So here are some tips on the installation of hydration bladder in your backpack:
Method 1:
With this method, you can easily fix a hydration bladder in your regular backpack.
Choose the Right Place
When installing a water system in your backpack, the first thing you need to do is find an appropriate location. It should be large enough to hold the bladder and convenient for easy access. You can choose any location based on your preference.
However, the best place to put it is in the side pockets of your backpack, as this ensures that you can easily reach it without having to remove your pack. Another ideal place for it is just behind the back padding of the backpack.
Attach the Hydration Bladder
After deciding a location to fix the hydration bladder, make sure it runs along with your harness. You can further secure it at its location by clipping it there. Also, make certain that the exit end of the hose is facing downwards.
Why is it important to secure the bladder in place? Because it will run along with your harness, you can make sure that it does not swing around while walking or running.
Always ensure that the drinking tube is properly secured at its place. There are several ways in which you can secure it. You can tie a knot or clip it to your harness.
Test Out
Once you are satisfied that the bladder is appropriately fixed, try it out before embarking on your next adventure. It is always better to test things out to identify any flaws beforehand than to delay it and land in trouble at the eleventh hour.
If you find any knots or twists that stop the water from flowing properly, then fix them. Sip through the hose to ensure that the water runs without any difficulty. If the water flow is smooth you have effectively fixed the water bladder and now you are ready to make use of the hands-free mode for drinking during your upcoming journey.
Although you can install a hydration bladder in your backpack within no time, you need to be extra careful while following the process. Otherwise, you might run out of your key water source without even knowing it.
Method 2:
If you have an old backpack and you want to turn it into a hydration pack, then this method is for you.
Step 1:
If you already possess a used backpack, then it is perfect. Otherwise, you can easily get one from a store that deals in second-hand products.
Step 2:
Now it is time to take your backpack and make a hole at the bottom of the pack. Take the hydration bladder and fix it in the hole. Now properly join the exit part of the tube to the inner pipe. Don’t forget to tighten the tube in its place securely and fasten the nut that joins the two tubes.
You are now ready to try out your new water pack and check for any hindrance to the water flow. Just put a small amount of water in the bladder and slide it over the backpack’s edge. Now check whether the water is dripping out; if so, you have successfully fixed the bladder.
Also Read: The Best Hydration Pack for Snowboarding
To Wrap Things Up!
A hydration bladder comes in handy when you plan to spend a day or two hiking. It enables you to have a water supply with you at all times, keeping you well hydrated and motivated. It also frees you from carrying a bottle in your hand, which might make the trail unpleasant.
After reading this article, you should now know how to install hydration bladder in backpack. Remember that you will need to clean and dry it before use. If you have any questions or comments, please leave them below, and we will get back to you as soon as possible.
If you also want to learn how to pack your sleeping bag properly, you need to read this guide!
Frequently Asked Questions
Can you put a hydration bladder in any backpack?
Yes, you can fix a hydration bladder in any backpack without any issue by following the three simple steps discussed above.
How to turn a backpack into a hydration pack?
You can modify your old backpack and convert it into a hydration pack by following the second method in this article.
How do you drink from a hydration pack?
Just suck the water from the tube the way you do it from a straw.
How much water should I carry?
It depends on the activity you are carrying out. For a light trek, experts suggest taking half a liter of water in an hour. However, for extreme hiking in the heat, you may need to consume at least one liter of water in an hour.
What size hydration pack should I buy?
It again depends on the size of your backpack. You cannot accommodate a large (3L) hydration bladder in your small day pack.
Do hydration bladders last long?
Yes, hydration bladders do usually last for a couple of years if used with care.
Can I use hydration powders?
Hydration powders may not fit every individual. Therefore, it is always better to consult a doctor before using such powders.
How to clean hydration bladder?
Fill the hydration pack with lukewarm water and add some cleaning tablets or detergents to it. Now shake it well and empty the mixture. Add more clean water until you are satisfied with the result.
Are hydration backpacks worth it?
Hydration backpacks are not only space-saving but also allow you to sip water on the go, thus contributing to your overall wellbeing.
What things should I consider when getting a hydration bladder?
Don’t compromise on the material; look for a comfortable product, and check whether the hydration pack is easy to fill up and drink from and that you can clean it with ease.
How do you install a hydration bladder on a backpack?
If you’re planning on doing any sort of outdoor activity that will involve sweating, it’s important to stay hydrated. One of the best ways to do this is to use a hydration bladder, which is a water reservoir that you can carry on your back. Most hydration bladders come with a hose that you can drink from, making it easy to stay hydrated on the go.
Installing a hydration bladder on your backpack is a fairly simple process. First, find the spot on your backpack where the bladder will sit. Most backpacks have a designated spot for a hydration bladder, usually near the back. Once you’ve found the spot, thread the hose through the opening and clip it onto the backpack. Then, insert the bladder into the backpack and make sure it’s secure. Finally, fill up the bladder with water.
How do you use a backpack bladder?
A backpack bladder is a water reservoir that is placed in a backpack for the purpose of carrying water. The bladder is usually made of flexible materials such as plastic or rubber, and it has a fill cap and a discharge valve. Most bladders also have a bite valve, which is a small valve that you bite to open and close the flow of water.
To use a backpack bladder, first fill it with water through the fill cap. Then insert the bladder into your backpack, and secure it in place with the straps or clips that are usually provided. When you’re ready to drink, bite the bite valve to open the flow of water, and then drink from the valve. To close the flow of water, simply release the bite valve.
How do you use a water bladder backpack?
Water bladder backpacks are becoming increasingly popular, especially among hikers and other outdoor enthusiasts. A water bladder backpack is a backpack with a built-in water reservoir that allows you to easily carry and drink water on the go. They are ideal for long hikes or other activities where you need to stay hydrated but don’t want to carry a lot of water bottles.
Using a water bladder backpack is easy – simply fill up the reservoir with water and drink from the hose when you’re thirsty. Most water bladder backpacks also have a built-in filter, so you can fill up from any water source without worrying about getting sick. When you’re finished using the backpack, simply empty the reservoir and dry it out before storing it away.
How do you keep a hydration bladder cold?
There are a few different ways to keep a hydration bladder cold. One is to freeze the bladder itself overnight. Another is to fill the bladder with ice water and then keep it in a cooler. And finally, you can purchase a bladder that has a built-in cooling system.
Which method you use will depend on your personal preferences and how long you need to keep the bladder cold. If you’re only going on a short hike, for instance, freezing the bladder might be the easiest option. But if you’re going on a multi-day trek, you’ll probably want to opt for a cooler or a bladder with a built-in cooling system.
Whichever method you choose, keeping your hydration bladder cold will help you stay hydrated and comfortable on your hike.
