Last updated on September 1st, 2022 at 08:21 am
How to Fix a Broken Backpack Strap in
Less Than 30 Minutes
Your backpack strap has snapped and you don’t know what to do. You might think you need to buy a new backpack but in fact, it is really easy to fix the strap yourself.
If your backpack strap breaks, it is probably because the threads that make up the stitching had come loose. While this may look similar to a problem, it’s easy to fix! All you require are some simple household items and five minutes of time. Using these items and following this guide will let you know how to fix a broken backpack strap so that you can continue using your favorite bag without any problems.
Table of Contents
A Broken Backpack Strap Can Be Frustrating!
A broken backpack strap is a common occurrence that can lead to frustration. A backpack strap break leaves you in an awkward situation, whether it be needing to carry the bag and your books or leaving all of your belongings behind. Luckily, there are several different ways to try and fix a broken backpack strap before throwing out your bag or buying a new one.
Two Ways to Attach a Broken Backpack Strap
Your backpack strap just broke, and now you’re stuck. You call your mom, who says to take it to the shop and have it repaired. But what if there was a way to fix it yourself? Not only will this save you money, but it also demonstrates that you can be resourceful in those “oh crap” situations.
The first method is using Duct Tape to glue the two straps together. This is the easiest method and is good for a temporary fix. The second method involves taking apart the strap and sewing the parts that need to be attached. This is a more difficult method but can be carried out with a little effort and patience.
How to Fix a Broken Backpack Strap Using Duct Tape: Quick Solution
If you have a backpack that needs a strap fix, you can use duct tape as a temporary patch until you can replace the strap with a new one.
Duct tape will protect the fabric from ripping further and help keep your backpack strap together for a little while longer. However, the duct tape will eventually begin to rust and tear away from the fabric. It should not be used to permanently fix a broken strap.
What You Will Need?
- Duct Tape
- Stapler
Step 1: First things first: Empty your backpack to avoid tape residue on your items. The residue can ruin any item or accessory that touches it. It will also leave a sticky spot on any surface it comes into contact with. Some tapes are more known for this than others.
Step 2: Put on rubber gloves to protect your hands from any dirt or stains and clean the edges of the broken strap and the area where it has separated. The cloth you use should preferably be damp so that it won’t scratch the surface of the straps.
Step 3: After cleaning the edges, leave them to dry naturally.
Step 4: Now take the tape and cut off a long piece. You will need enough to cover the gap where the strap used to be, as well as some extra length for taping down the edges.
Step 5: Push the tape inside the gap from where the strap has come off. The more you make sure there is enough tape sticking to each side, the easier it will be for you to close it up when you are done.
Step 6: Now it is time to place the broken strap onto the glued tape. Try to push the strap slightly into the gap and use your thumbs to apply pressure onto the fabric. The pressure must be gradual and firm.
Step 7: Take another piece of duct tape and wrap it around the attached ends of the strap.
Step 8: Finally, staple the wrapped area every few centimeters. This will ensure that the two ends of the strap stay together as firmly as possible.
How to Fix a Broken Backpack Strap by Sewing It: Permanent Fix
Sewing a broken backpack strap is easy and will save you the cost of a new backpack. It’s always a good idea to take care of your things and not just replace them when they break.
We have all been there, the strap on our backpack breaks: we throw it in the trash or keep it as a backup and buy another one. Instead of throwing it away or buying a new one, why not try sewing it back together? We know, scary right! It doesn’t take long, it’s easy and it saves you money!
What You Will Need?
- Needle
- Scissors
- Nylon upholstery thread and cloth
Step 1: Thread the needle, align the two ends, and tie a knot
Step 2: Use scissors to remove any loose threads or frayed edges from the broken strap and the part where you are going to sew it.
Step 3: Take a piece of the nylon cloth and align it with the broken strap. Fold it over the edge of the strap, making sure that the two edges line up. This will protect the edges of your strap from wear and tear.
Step 4: Start sewing across the broken strap using a backstitching sewing method. Sewing should be done with care so that the thread is going through both pieces of fabric and not too close to the edge.
Step 5: It is now time to end the stitch. There are two ways you can tie a knot at the end of your thread when you’re backstitching. The first method is to leave about an inch of thread between the stitches at the end of a long line of backstitching. Then take the needle through the fabric and pull it all the way through; repeat this on both sides of the line. The second method is to leave about ½ inch of thread between the stitches. Then take the needle through the fabric and pull it all the way through.
The first part of the sewing was to secure the edges of the broken strap with a cloth. In the second part, we will sew it to the place from where it had detached.
Step 1: Align the strap and the part where you are going to stitch it properly.
Step 2: Firmly hold the two parts together and start sewing with the same method mentioned earlier.
Step 3: Sew with utmost care to avoid any unwanted tangles.
Step 4: Once completed, tie a knot using any of the techniques discussed above.
Step 5: Cut any loose thread or wear-out edges to your satisfaction.
Make Sure To Test Out Your Fixed Bag!
Don’t rely on your eyes to check if the strap is fixed perfectly or not. Try testing the backpack by filling it with items and going for a walk. If you can carry it easily and don’t feel any pain in your shoulder, then it’s okay to use the bag again.
Don’t be a Victim of Your Backpack Straps Breaking!
If you are carrying a heavy backpack on your shoulders, you are at risk of having your straps break. This can be very painful. The causes of broken backpack straps are related to overloading the pack and wear and tear. To prevent breaking backpack straps:
- Check the straps for wear and tear before each use. Replace if necessary.
- Do not overload your pack. A loaded backpack should weigh no more than 20% of your body weight.
- Do not leave a backpack in direct sunlight. Heat can damage the straps.
- Use a backpack with padded shoulder straps and a waist belt. This will distribute the weight more evenly and help prevent back pain.
Carry a Backpack Repair Kit
Unless you’re an avid hiker or spend a lot of time outdoors, it’s easy to forget that there are all sorts of things that can happen when you’re out in nature. Everything from getting caught in the rain to tripping over a tree root can spell disaster for your wardrobe if you aren’t properly prepared.
While you definitely don’t want to go overboard with safety gear, having a few key items in your backpack can make a big difference when you find yourself in a sticky situation.
When repairing your bag, you might not know what to do or what tools to use. So having a repair kit is a good idea. It contains different equipment which can help you fix small problems in no time.
Also Read: Fix Backpack Broken Zipper
To Wrap Things Up
With a little bit of effort and the right tools, you can repair your broken backpack strap in no time. The next time you break one, remember these simple solutions to get back on track quickly.
We hope this article about How to Fix a Broken Backpack Strap has been helpful! If you have any questions or concerns about backpack straps or anything else related to backpacks, please feel free to leave a comment or contact us today.
Frequently Asked Questions
How do I stop my backpack straps from loosening?
Have you ever noticed that the straps on your backpack tend to loosen? This can be a huge pain when you are trying to walk with your hands full. Luckily, there is a way to prevent this from happening.
First, make sure your backpack is fitted for you. You should be able to fit two fingers comfortably between the strap and your body. You can use carabiners or a locking clasp to keep the straps in place while on the go.
Why are backpack straps so long?
Backpack straps are long because they provide extra space between the back and the shoulder. This allows for greater weight distribution and keeps the shoulder in a safer position.
Also, backpack straps are long because they are meant to fit all sizes of bodies. The idea behind this is that most people do not want to buy a backpack that is too small for them, and this way they can use the same backpack for years.
What is a backpack strap keeper?
A backpack strap keeper is a practical accessory for backpacks that helps keep the shoulder straps from slipping off your shoulders. A strap keeper can be attached to any backpack and is a great solution for those carrying backpacks on their commute to work or school who want to prevent the shoulder straps from falling off during the day.
Can you take apart a ratchet strap?
Yes, it is possible to take apart a ratchet strap. A ratchet strap is actually very simple in its design and concept. There is a lot of slack for the shaft to move around in which makes it easier for the ratchet mechanism to lock and release. The hole that the shaft goes through is also bigger than most people would think since the shaft has to rotate freely back and forth inside that hole.
A ratchet strap can be taken apart by removing one bolt from the shaft. Then you can use pliers to unscrew the other bolt, both of which are usually located on the top part.
How do you fix a broken bag strap?
If you’re the unlucky owner of a broken bag strap, there’s no need to despair. With a few simple tools and a bit of elbow grease, you can easily fix your strap and be on your way.
First, gather the following supplies: a sharp knife, a piece of duct tape, and a length of string or cord. Then, follow these steps:
1. Use the knife to carefully cut the broken strap away from the bag.
2. Cover the raw edge of the strap with duct tape to prevent it from fraying.
3. Measure the length of the strap and cut the string or cord to match.
4. Tie the string or cord to each end of the strap, making sure it’s secure.
5. Trim any excess string or cord.
How do you fix a broken shoulder strap?
If your backpack’s shoulder strap is broken, there are a few things you can do to fix it. Depending on the severity of the break, you may be able to simply reattach the strap or you may need to replace it entirely.
If the break is minor, you can try to reattach the strap using a needle and thread. If the break is more severe, you may need to replace the entire strap. You can purchase replacement straps at most craft stores or online.
Once you have the new strap, you will need to remove the old strap. To do this, you will need to unscrew the hardware that is attaching the strap to the bag. Once the hardware is removed, you can then attach the new strap in the same way.
How do you fix a leather backpack strap?
If your leather backpack strap has become worn or damaged, you can fix it with a few simple steps. First, clean the leather strap with a damp cloth to remove any dirt or debris.
Now, use leather glue to attach the strip of leather to the broken strap. Then, use a needle and thread to sew the strip of leather in place. This will reinforce the strap and keep it from breaking again.
With just a little bit of effort, you can easily fix a broken leather backpack strap and keep your backpack looking great for years to come.
